Item no. 43.99990.BA-EN07 / 27.09.19
36/36
Cleaning instructions
TECHNIBILT, LTD / PO BOX 310 / NEWTON, NC 28658,
1-800-351-2278
Rudolf-Wanzl-Straße 4, 89340 Leipheim, Germany
Tel. +49(0)8221/729-0, Fax +49(0)8221/729-1000,
E-mail: [email protected], Internet: www.wanzl.com
Copyright for this manual is held by Wanzl Metallwarenfabrik GmbH.
This manual is only intended for the user and the user’s staff. It contains instructions and information
that may not be reproduced, distributed or otherwise communicated, in full or in part.
Infringement of this copyright may result in legal action.
Dimensions are approximate. We reserve the right to make design changes.
8
Cleaning instructions
We recommend the use of non-abrasive microfibre cloths for cleaning chrome-plated surfaces.
In the event of heavy soiling, cleaning can be supported by liquid hand detergent.
Commercially available citric acid-based sanitary cleaners can be used to remove limescale
deposits and stains. Please observe the relevant instructions for use and the safety instructions
of the respective manufacturer.
Important:
After cleaning the chrome surface - especially when using cleaning agents to remove limescale
- the treated surfaces must be thoroughly rinsed with fresh water and then dried with a clean
cloth. The latter prevents the formation of water stains.
Fig. 107 Base depth D=600 mm / 24 in
axial dimension A=1,250 mm / 48 in
=>Base shelf
load =105 kg / 232 lb
750 kg / 1,654 lb
total load of inserted
shelves
Fig. 108 Base depth D=700 mm / 28 in
axial dimension A=1,333 mm / 53 in
=>Base shelf
load =180 kg / 397 lb
750 kg / 1,654 lb
total load of inserted
shelves
