Wansview W2 User Manual Download Page 57

Page: 57 / 61

IP Camera W2(1080P)/W3(720P)

Alarm > Motion Detection (Intruder Monitor)

The Motion Detection in the Web

Interface is more advanced than in

the App. User can set up to 4

detection areas and diﬀerent

sensitivity. 15 corresponds to the

lower level and 55 to the mid-level.

The IP Camera begins recording

when it detects movement/audio

and stops recording in 30 sec. In this

section, users can customize the

motion detection feature. This

feature can be set on the app or in

the web interface. Motion is

detected by changes in the pixels of

Alarm > Audio Detection (Baby Monitor)(function disabled in this model)

Alarm > Alarm Action

the images.

Please note that motion detection doesn’t work through windows. In this case we recommend to

connect an external motion sensor out of the window using the IO alarm port.

Summary of Contents for W2






























































Search results

Summary of Contents for W2

Reviews:

Related manuals for W2

Brands by name

Popular brands

Wansview W2, User Manual

Search results

Summary of Contents for W2

Reviews:

Related manuals for W2

Brands by name

Popular brands