Wansview W2, User Manual

Page: 56 / 61

IP Camera W2(1080P)/W3(720P)
56
5.4.5 Alarm - Motion and Audio Detection
Security > IP Filtering
This screen allows for the filtering
of IP addresses, either blocking
them or granting them access to
the camera.
This feature helps make the
camera more secure by limiting
remote access only to approved
users. Below is a Screen shot of the
IP Filtering screen.
Security > Mask Area (not available for MAC users)
Users exclude up to 4 areas from
monitoring.
Click Start Setting and check the
windows.
Alarm > IO Detector (disabled in this model)
Camera allows user to add an
external source of alert (motion
sensor or push button). We
recommend the Instar IN-500 PIR
Sensor as external motion sensor.
The external sensor can be always
open or always close. Please check
your alarm device setting in the
user guide.