Support Email/ Skype: [email protected]
32
Alarm Action:
Save Picture to Email
: When a alarm is detected, the camera will send two alarm pictures to the email you set. We support Gmail,
hotmail,Yahoo,Gmx etc.
Save Picture to FTP
：
When a alarm is detected, the camera will send 2 alarm pictures to to the FTP server you set, 3-4 pictures will
be sent if the motion is too frequent.
Save Record to FTP
：
When an alarm is detected, the camera will send alarm video to the FTP server you set. The video length is
about 15 seconds for each alarm video, for constant recording, the alarm will be upload to FTP every 30seconds.
Save Picture to SD/TF
：
When a alarm is detected, the camera will send 2 alarm pictures to SD card, 3-4 pictures will be sent if the
motion is too frequent.
Save Record to SD/TF
：
When an alarm is detected, the camera will send alarm video to the FTP server you set. The video length is
about 15 seconds for each alarm video, for constant recording, the alarm will be upload to FTP every 30seconds.
Trigger IO Output
：
When an alarm is detected, the external IO output device will be linked then send alarm; it doesn't support
PoE.
Preset Linkage
：
When an alarm is detected, it will be linked to the camera to Pan/Tilt the camera to the Preset you set.
Speaker Linkage
：
Link the speaker to send alarm when a alarm is detected.
4.4.5 Advanced Setting
4.4.5.1 Wi-Fi Setting
Access to Advanced Settings, users can edit
camera settings like WiFi setting, password
changing, Time display on live video, Save
picture/video to FTP/Email and TF card, Reboot
camera to factory default and check the camera’s
firmware etc.
Access to WiFi setting, user can set the camera connected with WiFi.
Notice:
1.The camera only support 2.4Ghz frequency.
2. User can check whether the camera is connected with WiFi or not.
When Searching WiFi, user can see the WiFi encryption and signal
strength
3. The password shall be not longer than 31 characters. The following
special characters are not be supported in SSID and password:
‘
and
&
