WANSCAM User Manual
19
Figure 3.8
The Pan/Tilt Feature only work
when the cameras have this Pan/Tilt function.
This option enables log detection. After the online user clicks this button, a log is
entered into the camera’s Log Data documenting the IP address of users who have
accessed the IP camera. This Option enables alarm detections too.
This button make the camera Vertical cruise (for the Pan/Tilt Cams).
This button make the camera Level cruise (for the Pan/Tilt Cams).
This button flips the image vertically.
This button flips the image horizontally.
This button for turn on and turn off the IR LED Light.
Control the speed of the Pan/tilt. Only work for the Pan/tilt Cams.
This button for setting the Preset of the camera. Only work for Pan/tilt
Cams
This setting changes the color of the OSD lettering.
This setting changes the image resolution.
This setting changes the image frequency.
This setting changes the image brightness.
This setting changes the image contrast.
This option resets all main menu options to factory default.
This option opens the camera’s recording functionality menu.
This option takes a snapshot of the current screen and saves the snapshot to the
PC’s Hard Drive.
This option enables User-to Camera audio. If the online user
This option enables Camera-to-User audio. If the online user has speakers
connected and configured to their PC, clicking this option will allow them to hear audio
from the location of the camera.
This option enables the camera’s Network Indicator LED light turn on or turn off.
This button opens the IP camera’s Backend Menu
These options enable single view, quad screen view, or 9 screen view:
This function serves no purpose unless you have more than one camera connected and
configured to your interface.
* Please refer to section 8.1.1 Multi-Device Settings*
