WANHAO Duplicator 4, User Manual, Page: 16 / 48

INSTALLING BUILD PLATE
------------------------------------------------------------------------------------------------------------------------------------------------
8. Mounting the Filament Spool
A. Open the box containing the
WANHAO
ABS and PLA Filament. Remove the
spool from its bag.
B. Fit the spool onto the spool holder.
Ensure that the WANHAO ABS and
PLA filament unwinds
counterclockwise(when viewed form
the back).Squeeze the spool holder
and push the spool on until it locks.
USB cable
Spool
Holder
9. Attaching the USB Cable
A.
Locate the USB-A to USB-B cable.
Insert the USB cable into the USB-B
Port on the back of the WANHAO
Duplicator 4/4x. Do not attach the other
end of the USB cable to anything yet.
Do not plug the AC power cord into
an electrical outlet until step 11 of this
chapter.
SETTING UP YOUR WANHAO DUPLICATOR 4/4x DESKTOP 3D PRINTER
---------------------------------------------------------------------------------------------------------------------------------------
--------
15