W&T rule.box 53920, Operating Instructions Manual

Page: 19 / 30

19
5. Use
👥
IoT developers and end users
The following section is intended for developers and users of Node-RED flows and
dashboards.
📚
Node-RED documentation
This manual does not cover the programming of Node-RED. A good introduction to
this can be found in the official documentation at:
🌎
www.nodered.org/docs.
Node-RED
⛳
Open Node-RED Editor
The Node-RED Editor can be accessed via the IP address of the device and the
port assigned in the network settings under „Web access“:
🌎
http(s)://IP:Port .
This is port 1880 in the default setting. Alternatively, the editor can also be ac-
cessed via the web interface.
1. Open the rule.box web interface.
2. In the left menu, click the Node-RED Editor button.
3. If necessary, enter the user name and password for the Node-RED Editor to
log in.
The editor is loaded.
⛳
Open Node-RED Dashboard
The Node-RED Dashboard can be accessed via the IP address of the device
and the port assigned in the network settings under „Web access“:
🌎
http(s)://
IP:Port/ui . This is port 1880 in the default setting. Alternatively, the dashboard
can also be accessed via the web interface.
1. Open the rule.box web interface.
2. Click the Node-RED Dashboard button in the left menu.
3. If necessary, enter the username and password for the dashboard user to
log in.
The dashboard is loaded.