31
Subject to error and alteration
are now associated with your account and are available for you
immediately.
Alternative:
6.4 Assign measured data via user account in the
device
After you have created a cloud user account, open the configu-
ration menu of your device and login as admin user. Navigate
to the page
Communication Paths -> Cloud
and enter your user data for the cloud access. After clicking on
the button „Bind“ all measurement data of this device, from
this moment, is stored into your user account.
By clicking on the button „Unbind“ the allocation of the data
from this moment is separated and no further values will be
stored in your account.
Click again on „Bind“ and a new series of measurements is
created in the cloud for your user account that contains all the
unassigned values of the sensor.
!
For further information about the service of the Cloud
functions you find instructions on http://cloud. wut. de
