W&T 53641, Manual

Page: 66 / 79

66
W&T
Appendix
7.5 Used ports and network security
In its standard factory setting the USB-Server uses the TCP and
UDP port numbers shown in the table below.
Configurable
yes
yes
no
no
no
no
Port-/Socket-
number
32032 (TCP)
80 (TCP)
8888 (TCP)
2682 (TCP)
8513 (UDP)
69 (UDP)
Application
Data USB redirector
Web-Based-Management
Reset USB-Server
Initialize
Firmware update
Inventory
Firmware update (only after
initialized through 2682)
Password
protection?
no
yes
yes
yes
no
(yes)
1
When the factory setrting for the sevices for USB data
transmission and WBM , different TCP port numbers must
always be used.
The USB-Server and network security
Network security is being given increasing attention today, and
rightly so. All experts agree that there is no such thing as ab-
solute security given today‘s state of the art. Each customer
must therefore seek an appropriate balance between security,
functionaltiy and cost for his specific needs and circumstances.
To give the customer the greatest possible flexibility based on
changing security requirements, from a purely testing and
installation environment to critical production applications, the
security measures are highly configurable. The present
document provides an overview of the security measures
implemented in USB-Servers which can be used. It is assumed
that the original firmware from W&T (without any customer-
specific adaptations) is being used. Additional details can be
found in the respective sections of this manual.