11
Subject to errors and modifications
W&T
Quickstart
Step 4: Setting the network parameters
The default address of the
W&T USB-Server
is:
190.107.233.110
In addition, DHCP protocol is the factory default. If the network
in question has a DHCP server, the network basic parameters
are automatically assigned after powering up the
W&T USB-Ser-
ver
and after it is connected to the network.
Alternately the
WuTility
inventory and management tool can be
used to switch to static network parameters. Install this tool on
a Windows PC from the included product CD; the PC must be
located in the same subnet as the
W&T USB-Server
.
After starting,
WuTility
automatically searches the network for
accessible W&T network devices. Select from the list of found
devices the desired
W&T USB-Server
and then click on the
IP
Address
button.
The following dialog allows you to switch to
Static
mode for
manually assigning the IP address, subnet mask and gateway.
Activating
Static
mode automatically deactivates DHCP
protocol.
1
Detailed information about the various methods of
assigning the IP address is found in the
Assigning the IP
address
section.
Summary of Contents for 53641
