35
W&T
Subject to errors and changes
3.5.3 Scale Config
Scale:
The graph can display four different scales. Each individual
scale can be assigned the following parameters:
unit:
The unit used for this scale.
min:
The lowest displayed value on this scale
max:
The highest displayed value on this scale
auto scale:
The lower and upper values for this scale are
selected automatically based on the measured values, so that
an optimal, dynamic display is achieved. If this function is
activated, the existing parameters „min“ and „max“ are ignored.
auto fit:
If this function is activated, the scale is corrected so
that only whole-number values are shown on the display grid.
Auto fit
automatically activates the
auto scale
function.
