47
W&T
Subject to errors and changes
Attach thermo.csv enable:
The „Attach thermo.csv enable“
option allows you to attach the complete contents of the data
logger in semicolon-separated CVS format to the e-mail. The
time base of the output corresponds to the data logger settings.
!
The file is generated dynamically in the device, so
that when the logger content is large creation of the
CSV file may take up to 30 seconds. During this time no
other e-mail can be sent. Pending alarms are send directly after
the mail with attachment is sent.
CSV-Data since last report:
This option causes that only the
data is written into the CSV file, which is measured since the
last transmission interval.
!
This function only works properly if only the timer
function is selected and no limit values are configured.
Alarm Clear Text:
An Alarm Clear message is also sent when
the temperature rises or drops to the valid range. Here you can
use the same tags as for the alarm message.
