W&H piezomed SA-320 Instructions For Use Manual Download Page 69

Page: 69 / 74

Open Source Software

The software running this product was developed by utilization of the library QT of Digia. As kernel Linux is applied, the initial

starting sequence is carried out by using the bootloader U-Boot. For CANopen communication CanFestival is applied.

These and all other software components are copyrighted by W&H Dentalwerk Bürmooos GmbH or third parties.

The source code of the used software components (Linux, Qt, U-Boot and CanFestival) will be provided on request, charging all

arising expenses. Please contact: [email protected]

There is no warranty transferring this software, neither implied warranty nor express warranty.

You will find further information concerning the applied license versions and the complete license texts under

www.wh.com/en_global/gnu

Alternatively, you can obtain them directly from the manufacturer.

Summary of Contents for piezomed SA-320











































































Search results

Summary of Contents for piezomed SA-320

Reviews:

Related manuals for piezomed SA-320

Brands by name

Popular brands

W&H piezomed SA-320, Instructions For Use Manual

Search results

Summary of Contents for piezomed SA-320

Reviews:

Related manuals for piezomed SA-320

Brands by name

Popular brands