13
5. Safety notes
> Before using the medical device for the first time, store it at room temperature for 24 hours.
> Check the medical device for damage and loose parts each time before using.
> Do not operate when the medical device is damaged.
> Check the parameter settings every time you restart.
> In case of coolant supply failure, the medical device must be stopped immediately.
> Perform a test run each time before using.
> Do not look directly into the light source.
> Avoid overheating at the treatment site.
> Ensure that it is possible to complete the operation safely should the units or instruments fail.
> Only put the handpiece with cable into operation when the handpiece sleeve is attached.
> The responsibility for the use and timely shutdown of the system lies with the user.
> If the LED fails, change the LED socket.
> Only change the LED socket when the handpiece is stationary.
> Always operate the handpiece with the LED socket fitted.
The medical device is not approved for operation in potentially explosive atmospheres.
Do not twist or kink the cable! Do not coil it too tightly!
