9.0 INFORMATION REGARDING FAULTS
52
SBB-HFF
2
EXT.SBB-HFF.--.M.A.0219.EN Issue: A
02.19
If you have been unable to solve the problem on the equipment (machine) even after having carried out
the operations suggested in paragraph “Trouble-shooting” please contact the plant technician/installer/or the
Manufacturer.
If technical assistance is required, in addition to the equipment data, the plant technician/installer or Manufac-
turer will also need information concerning the plant in which the equipment (machine) is installed, its installa-
tion and its working, for better identification of the problem that has occurred.
Obviously many of the checking operations which are requested have already been performed in the various
steps during installation, testing and start-up of the equipment (machine) concerned.
Danger - Warning
Before carrying out any operation “set the equipment (machine) concerned in safety” (see “Glossary
and terminology”), operate according to the indications on the “Operation and Maintenance Manual”
and in accordance with and in compliance with the standards in force as regards health and safety.
1) Information necessary
a)
Description of problem.
b)
Photo showing the machine.
c)
Identification machine by the Label.
d)
Machine position (inside/outside)
e)
Vibrator cycles: Time on/off
f)
Conveying system at the outlet (screw conveyor, rotary valve, etc.)
2) Checking the product
a)
Product description?
b)
Density? (kg/dm
3
)
c)
Particle size? (μm/mm)
d)
Moisture? (%)
e)
Flowability?
f)
Compressibility?
g)
Abrasiveness?
9.2 Check-list in case of fault
Summary of Contents for SBB-HFF
Page 57: ......
