5.0 INSTALLATION AND FIXING
2
EXT.SBB-HFF.--.M.A.0219.EN Issue: A
02.19
24
SBB-HFF
-
MODELS C, S, M
The machines are already partially assembled; the frame is to be assembled and the hopper is to be installed
(see below).
- All the machines must be fixed to the ground or to a solid structure before use.
- Make the electrical connections of the electric vibrator to all the machines.
- For all the assembly operations listed above, proceed as described below.
NOTE:
It is the installer’s responsibility to dispose off the packaging in a suitable manner, in compliance with
existing legislation.
Use lifting equipment that is suitable for the weight, dimensions and movements required.
Hook the equipment to the lifting device by means of flexible straps and use hooks with safety fasteners.
Do not use clamps, rings, open hooks or other systems which do not guarantee the same safety as shackles
or hooks with safety fasteners.
If the straps are in close contact with the equipment it is advisable to place protective elements between the
two to avoid damage.
Caution
1) Use lifting equipment which acts from above.
2) Keep the equipment at a minimum distance above the ground.
3) Do not stand near or walk under suspended loads.
Summary of Contents for SBB-HFF
Page 57: ......
