LBC
3.0 TECHNICAL FEATURES
2
VAL.LBC.--.M.A2.1219.EN Issue: A2
12.19
13
3.5 Improper use not permitted
It is forbidden working without safeguards in the form of mechanical or electrical safety devices where quick
release fixing and or quick release openings are used.
It is forbidden working without mechanical or electrical and/or electromechanical safety device(s) if the pre-
scribed safety clearances are not to be complied with.
It is forbidden to use the device in absence of physical and psychological suitability.
it is forbidden to operate with connection to an open system without necessary safety devices (refer to Safety
specific chapter).
It is forbidden to operate in absence of the appropriate personal protection devices.
It is forbidden to operate but very carefully during the manual mode handling.
It is forbidden to use the device or carry out maintenance operations in scarce visibility or lighting conditions.
It is forbidden to use the equipment in presence of voltage drop on the power supply line or in case of acci-
dental lack of phases.
It is forbidden to carry out temporary repairs or improvised restoring which do not comply the instructions given.
It is forbidden to use non-original spare parts or spare parts which the Manufacturer has not recommended.
It is forbidden to
entrust maintenance or repair operations to personnel who has not properly trained by the
Manufacturer.
It is forbidden to leave the device at the end of the working shift without having set he safety conditions.
It is forbidden to carry out routine maintenance operations, inspections or repairs without having shut down the
device and enabled the related procedure.
During maintenance operations it is forbidden to:
- use inappropriate means;
- lay ladders against the mobile elements, against the handling equipments or against the material handled;
- operate without the appropriate personal safety devices;
- NEVER carry out operations without having removed the materials processed first.
It is forbidden to use the device unless perfectly working.
It is forbidden to use the device out of the limit of use (see specific chapter).
It is forbidden use of the LBC in conveying lines subjects to internal or external overpressure
It is forbidden use LBC with material tat has not been confirmed in writing by the manufacturer: Max Mohs
hardness 2 must not be exceeded
It is forbidden use machine with liquid and sludgy or slimly or greasy material.
It is forbidden use of product, the physical proprieties of which change during operation owing to the generation
of heat in the lump breaker (e.g. material became sticky or forms threads)
