P 5
Please retain product label and instructions for future reference
7
12
10
10
11
11
Step 8
Arrange the eaves frames (
No’s. 10,
11 & 12
) around the edge of the
roof sheet (
No. 7
) as shown in the
illustration.
Secure the framing in position using
30mm screws, ensuring to screw
through the roof sheet into the
frames.
16x30mm Screws
Pre drill
hole
30mm
screw
17
20
Step 7
Fix the 2x “L” brackets to either end of
the ridge bar using 2x20mm screws
per bracket.
*Ensure the bracket plate(
s
) are
flush with each end of the ridge
bar.
Once in place position the ridge bar
between the gable and window
panel, securing into position using
2x30mm screws per side.
4x20mm Screws
4x30mm Screws
Pre drill
hole
20mm
screw
30mm
screw
Step 9
Place the assembled roof panel on top
of the building and fix into position
using 30mm screws.
*Ensure to screw through the roof
sheet into the panel’s framing and
ridge bar.
22x30mm Screws
Pre drill
hole
30mm
screw
Step 10
Once the roof has been fixed into
place, secure the building to the
floor using 40mm screws.
*Ensure to screw through the floor into
the floor bearers using the nail pattern
as a guide.
16x40mm Screws
b
Pre drill
hole
40mm
screw
b
b
b
b
b
b
b
b