Rev. 1.4
Assembly Instructions
– Spray Valve SMS-11
Page 8 o
f
28
Walther Systemtechnik GmbH
– D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de
5 Mounting and Start of Operation
CAUTION
Hazard from ejected medium under high pressure. We highly recommend eye protection.
Depending upon the pressure for atomization and material, the spraying process can be
accompanied by loud noise! If necessary, we recommend ear protection. Only qualified
personnel are authorized to start the operation of the device (see also
2.6
Required
Qualification of Personnel), in accordance with the guiding rules and regulations for safety
and accident prevention.
The valves can be installed in any position. A clamping holder or a quick-change board are available for a
solid installation (optional, see accessories). The distance to the application area depends on the desired
application width.
An intermitting working process of the device will create natural vibrations. Therefore, the installation of the
device has to be solid and firm. Try to avoid extreme natural vibrations (transfer from the machine onto the
valve).
5.1 Hose Mounting
CAUTION
Only use hoses which can be used for the maximum operating pressure of the valve (see
also
4.2
Technical Data).
The three functional hoses will be installed as follows:
Fig.: SMS-11 (Standard)
(In the standard version, the circulation connection is locked; however, it can be easily replaced by a different
connection, if requested).
Material (transparent or white)
Connection M (to pressure container or pump)
Atomizer Air (blue)
Connection Z (to 2/2-way magnetic valve)
Control Air (black
)
Connection S (to 3/2-way magnetic valve)
Optional Material Circulation (transparent or white)
Connection M (return into material line)
Optional Jet Width Adjustment (blue)
Connection M5 (to 2/2-way magnetic valve)
