ULTI-MATE MANUAL
8
4.3 Mounting the accessories.
• Turn the side of the lower flange with the correct collar diameter to face
upwards.
• The collar diameter depends on the axis diameter of the accessory.
• Place the accessory disc on the lower flange.
• Lock the drive shaft with a No. 6 Allen key.
• Fit the flange nut.
• Secure the flange nut with the pin wrench and No. 6 Allen key.
The Ulti-Mate is a finishing tool uniquely and may only be used with recommended products. Consult a WALTER
applications expert to determine the correct type of finishing disc for each application.
5. Using the Ulti-Mate
TM
5.1 Optimal speed for the accessories.
Rpm setting
Setting
RPM
1
2 850
2
4 000
3
6 000
4
7 500
5
9 000
6
10 000
As a rule never exceed the maximum speed indicated by the manufacturer!
WALTER’s recommendations
Type of the accessory
RPM
Position
Enduro-Flex 2in1
7 500
4
Blendex U Turbo
7 500
4
Blendex U
7 500
4
FX Stainless
4 000
2
Felt wheel
2 850
1
