ULTI-MATE MANUAL
4
2.1 Work area safety
a)
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b)
Do not operate power tools in explosiv
e atmospheres, such as in the presence of flammable liquids, gases or
dust.
Power tools create sparks which may ignite the dust or fumes.
c)
Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2.2 Electrical safety
a)
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with
earthed
(grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b)
Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
c)
Do not expose power tools to rain or
wet conditions.
Water entering a power tool will increase the risk of electric
shock.
d)
Do not abuse the cord. Never use the co
rd for carrying, pulling or unplugging the power tool. Keep cord away
from heat, oil,
sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e)
When operating a power tool outdoors, u
se an extension cord suitable for outdoor use.
Use of a cord suitable
for outdoor use reduces the risk of electric shock.
f)
If operating a power tool in a damp location is unavoidable, use a residual current
device (RCD) protected
supply.
Use of an RCD reduces the risk of electric shock.
2.3 Personal safety
a)
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs, alcohol o
r medication.
A moment of inattention while
operating power tools may result in serious personal injury.
b)
Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c)
Prevent unintentional starting. Ensure
the switch is in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing
power tools that have the switch on invites accidents.
d)
Remove any adjusting key or wrench
be
fore turning the power tool on.
A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
e)
Do not overreach. Keep proper footing
a
nd balance at all times.
This enables better control of the power tool in
unexpected situations.
f)
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving
parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g)
If devices are provided for the connection of dust extraction and collection facilities, ensu
re these are
connected and properly used.
Use of dust collection can reduce dust-related hazards.
2.4 Power tool use and
care
a)
Do not force the power tool. Use the cor
rect power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it was designed.
b)
Do not use the power tool if the switch
does not turn it on and off.
Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c)
Disconnect the plug from the power sour
ce and/or the battery pack from the power tool before making any
adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d)
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e)
Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power tool's operation.
If damaged, have the power tool repaired before use.
Many
accidents are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
g)
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the
working conditions
a
nd the work to be performed.
Use of the power tool for operations different from those intended
could result in a hazardous situation.
