ULTI-MATE MANUAL
3
Product Specifications
Accessories
• Pin wrench
• Allen keys: 6mm
• Protective cover
• Handle
Warranty
If the machine is used according to instructions WALTER
offers a 12-month limited warranty. Parts affected by
normal wear and tear fall outside the scope of this warranty. If the user modifies the device during the warranty
period, WALTER is released from all warranty obligations.
Safety instructions
Always observe the following safety instructions for the use and maintenance of the Ulti-Mate:
• Do not leave any equipment keys on top of the machine.
• Always use both hands for support.
• Do not overload the equipment.
• Wear suitable clothing.
• Wear safety goggles, dust mask and ear protectors.
• Hold the work piece securely in place with clamps or a bench vice, if necessary. This leaves both hands free for
working.
• Avoid abnormal or unsteady posture.
• Do not use any electric tools, machinery or equipment in a wet or damp environment. Never leave electric
appliances out in the rain.
• Do not allow the machine to hang or swing from its cable. Do not attempt to unplug the machine from the power socket
by pulling on the cable.
Protect the cable against heat, oil and sharp objects.
• Check if the switch has been turned off when connecting to a power source.
Operating Instructions
1. Specified Use
The fillet weld grinder, when fitted with original Walter accessories, is suitable for blending, brushing &
polishing work on metals & other similar materials.
The ULTI-MATE
TM
6” finisher is designed for polishing work. We recommend using the ULTI-MATE
TM
finisher
for precision polishing work in hard-to-reach area and for continuous operation.
Machines with the designation DYNAMAX
TM
are suited for working at continuous speeds and optimizing
product performance. The thumbwheel is used for appropriated speed selection.
The user bears sole responsibility for any damage caused by inappropriate use.
Generally accepted accident prevention regulations and the enclosed safety information must be observed.
2. General Safety Instructions
For your own protection and for the protection of your electrical tool, pay attention to all parts of the
text that are marked with this symbol!
WARNING
–
Reading the operating instructions will reduce the risk of injury.
Pass on your electrical tool only together with these documents.
General Power Tool Safety Warnings
WARNING – Read all safety warnings
and instructions.
Failure to follow the warnings
and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference!
The term "power tool" in the warnings refers to your
mains-
operated (corded) power tool or battery-operated (cordless) power tool.
