WALTCO GT-33, Installation Manual

Page: 30 / 44

Chapter 5 Placement of Decals
All decals must be in place and legible or all warranties are void.
DECAL CHART
AREA DECAL QTY PART NUMBER LOCATION
1
3300 lb Capacity or
1
80100585
Locate in a conspicuous place near controls.
If your liftgate is equipped with dual
controls, an additional Safety Instruction
decal (80100850) is to be placed in a
conspicuous place near the second set
of the controls.
Refer to the following diagram showing decal
locations.
4400 lb Capacity or 80100587
5500 lb Capacity 80101308
Operation Decal 1 80101445
Safety Decal 1 80100850
Stand Clear 1 75089296
Hazard 1 80101370
2 3300 lb Capacity or
2
80100585 Locate on parallel arms
4400 lb Capacity or 80100587
5500 lb Capacity
80101308
Stand Clear 2 75089296
3 Use Handle Decal 1 75089295 Locate next to handle on platform extension
To maximize decal adhesion to surfaces:
•
Surface must be dry and clean
•
Firm pressure must be applied to decal
•
Minimum surface temperature 65º
Heat gun may be used to heat surface
2
2
3
1
30