Wally MILK, Operating Manual

Page: 9 / 54

EN
9
1) General Description
The machine is available in a single
version. To operate the machine, it must
be connected to a steam source using the
specific connection tube. Do not use tubes
other than the one provided.
The main components that make up the
machine are:
• Steam wand;
• Platform;
• Drip tray;
• Supply tube;
• Discharge duct.
Remove machine from packaging
1) Ensure product’s integrity by inspecting
the packaging, making sure it presents
no signs of damage which might have
affected the enclosed machine.
2) Check the machine’s integrity after
having carefully removed the packaging.
Packaging (boxes, plastic bags, foam parts
and whatever else) must not be left within
easy reach of children, due to the potential
danger it represents, nor be discarded in
the environment.
2) Description of the various parts
• Steam wand
The steam wand is the component that
allows the exit of the fluid. Do not touch
the wand when the machine is operating.
Although equipped with “performance
touch” technology, the wand could cause
burns as a result of a contact.
To ensure proper functioning over time
and always provide high-quality beverages,
it is recommended to clean frequently the
wand.
• Platform
The platform is the area in which to place
the pitcher. During the frothing operation,
the platform will tilt to allow the foam to
homogenise and obtain the best quality of
the foam. Do not touch the pitcher or the
platform during the frothing phase. The
platform can be removed for cleaning.
• Removable drain tray
When the machine is operating or during
cleaning, there may be accidental spills
of liquids. The drip tray allows containing
liquids to avoid they get in contact with
machine parts or that they end up on the
counter. The drip tray can be removed to
clean it in an easy manner.
• Exterior cover
The exterior consists of painted and
stainless sheet steel panels. To provide
good aesthetics, to optimize ergonometrics
for the operator and to reduce the chance
of damage to a minimum.
• Machine CE plate:
• Machine ETL plate:
• Machine KC plate:
MPa MPa
°C
WALLY MILK
220-240V 50-60 Hz
WA000000
45 05/20
0,12 0,2
134
STEAM
MPa MPa
°C
WALLY MILK
220-240V 50-60 Hz
WA000000
45 05/20
0,12 0,2
134
STEAM
MPa MPa
°C
WALLY MILK
220V 60 Hz
0,12 0,2
134
45
WA000000
05/20