Wally MILK, Operating Manual

Page: 6 / 54

EN
6
14) Before carrying out any
maintenance and/or cleaning
operations, turn the main
switch, which is located on
the front left of the machine,
to the “0” or “OFF” position,
and disconnect the machine
from the electrical network
by unplugging the cord or
by switching off the relative
circuit breaker. For any
cleaning operation, follow
exclusively the instructions
contained in this manual.
15) In case the machine is
operating in a faulty manner
or breaks down, disconnect
it
from the electrical
network (as described in the
preceding point) and close
the water supply valve. Do not
attempt to repair it. Contact
a qualified and authorized
professional to perform any
repair. Any repairs must
be performed exclusively
by the manufacturer or by
an authorized centre using
only original parts. Non
compliance with the above
could compromise the safe
operation of the appliance.
16)
You should plan to
make use of an omnipolar
connector during installation,
as required by local, national,
and international electrical
codes and regulations.
17) In order to avoid dangerous
overheating problems, it
is recommended that the
power supply cable be fully
unfurled.
18) Do not obstruct air intake
and exhaust grilles and, in
particular, do not cover the
cup warmer tray with cloths
or other items.
19)
The machine’s power
supply cable must not be
replaced by users.
In case the
power supply cable becomes
damaged, shut off the
machine and disconnect the
machine from the electctrical
network by switching off the
relative circuit breaker and
close off the water supply;
to replace the power supply
cord,
contact qualified
professionals exclusively.
20) These instructions are also
available in an alternative
format on a website