manualshive.com logo in svg

Wallenstein BX36S, Operating Manual

Share
Download
Wallenstein BX36S Operating Manual Download Page 2

Introduction

BX36S

3PH Self-feed Chipper

2

1.  Introduction

Congratulations on your choice of a Wallenstein BX 

Series 3 Point Hitch Wood Chipper to compliment your 

operation. This equipment has been designed and 

manufactured to meet the needs of a discerning timber 

or landscaping industry.

Safe, efficient and trouble free operation of your 

Wallenstein Wood Chipper requires that you and 

anyone else who will be using or maintaining the 

chipper, read and understand the Safety, Operation, 

Maintenance and Trouble Shooting information 

contained within the Operator's Manual.

This manual covers all variations of the Wallenstein 

3-Point Hitch Wood Chipper – BX Series. Your 

particular model may vary from the illustrations shown 

depending on your options package.

Keep this manual handy for frequent reference and 

to pass on to new operators or owners. Call your 

Wallenstein dealer or the Distributor if you need 

assistance, information or additional copies of the 

manuals.

Wallenstein Equipment Inc. • © 2018

 WARNING!

Do not attempt to start or operate the machine 

without thoroughly reviewing this manual for 

safe and proper operation.

Keep this manual with the machine at all times.

W034

This manual covers models:
BX36S
BX52S
BX72S
BX102S

Summary of Contents for BX36S





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands