Wallbox Copper Type 1 Case C Installation Manual Download Page 2

COPPER 

- installation guide

en

2

SECURITY PRESCRIPTIONS

CONTENTS

Disregard of or actions contrary to the safety information and instructions contained in this manual and printed on the device 
may lead to electric shock, fire and/or severe injury and either damage to the vehicle’s battery or to the Wallbox device. Any 
resulting damage from such actions is excluded from the warranty.
The installation of the Wallbox device must be performed by a qualified electrician in accordance with the perceptive regula-
tion.
The information provided in this Installation Guide does not relieve the user of responsibility to follow all norms and standards 
or local regulations that may apply.
The Wallbox charger device has been designed, developed and manufactured to satisfy requirements, safety dispositions and 
norms in accordance with the directives presented in the declaration of conformity (view Users Guide).

The user must read and understand in its entirety the safety instructions here provided.

SECURITY PRESCRIPTIONS 

2

SAFETY INSTRUCTIONS 

3

PRODUCT DESCRIPTION 

4

INSTALLATION INSTRUCTIONS 

6

PRECAUTIONS 6
DIMENSIONS & POSITIONING 

7

DRILL & MOUNT 

8

STARTUP 10
TROUBLESHOOTING 10
MAINTENANCE 10
WARRANTY 10

Follow all of the safety instructions and take special care to keep this manual handy. This installation 
manual is intended for qualified personnel only.

Summary of Contents for Copper Type 1 Case C











Reviews: