COPPER
- installation guide
en
10
STARTUP
Once the DRILL & MOUNT process is completed your Wallbox is ready to operate. But first lets take a moment to read and
review some useful information before starting to use your Wallbox:
•
Do not use your Wallbox for pruposes not described in the Product description chapter
•
Do not open in any case the charger’s front cover while the power supply is on.
•
Special precautions must be taken for medical or implantable electronics. Please contact the device manufacturer to
understand the effects that charging may have on such electronics.
•
REVIEW & CONFIRM ALL THE STEPS TAKEN
TROUBLESHOOTING
MAINTENANCE
•
Your network supply is continously checked to ensure a safe operation of the device. If one of the parameters is not in
range the charger will stop the power supply to the vehicle.
•
Charging process uses a secure comunication protocol (called Control Pilot) between your wallbox and the vehicle. If
the car detects a problem during the charging process, it will be interrupted. At this point a message will pop up in your
status menu.
•
The internal stats of the Wallbox are also being parameterized in real time. A change in the normal operating values
will lead the charger to safely disconnect the power supply to the vehicle.
Please take some precautions to ensure a correct maintenance :
•
There are no parts inside your Wallbox that need to be maintained by the user. Only qualified electrician can open and
manipulate your Wallbox.
•
Remeber to ensure that the power supply is turned off, before start cleaning your charger.
•
In case you want to clean your Wallbox, we recommned you to use a soft, dry or damp cloth. Do not use a spray or
direct water to clean your Wallbox charger.
•
It is mandatory to use the protection element or support, provided as an accessory, in order to protect the connector
from falling, dirt and other meteorological elements
WARRANTY
www.wallbox.com
At this point you can turn on the power supply and enjoy your Wallbox experience
