wallas Nautic 40D, Operator'S Manual With Installation Manual

Page: 4 / 16

WALLAS 40D
Operator’s Manual and Installation Guide
4
Figure 2: Joining the mounting bracket and optional
dampening plate. If purchased, the screws needed are
in the auxiliary bag of the dampening plate.
Figure 4: Attaching the furnace to the
mounting bracket.
Figure 3: Attaching the mounting assembly to
the bulkhead with four 5 x 16 standard
screws.
Figure 5: Locking the furnace in place with
two M8 x 120 locking bolts.
Figure 6: Attaching the control panel.
Note: either the 3004 or 3005 can be
mounted with or without the bezel
shown here. 3005 panel must have
the bezel fitted for thermostat to
function properly.
Figure 3: Attaching the mounting assembly to
the bulkhead with four 5 x 16 standard
screws.
PLEASE NOTE: If the optional dampening
plate is not purchased, simply attach the
mounting bracket to a vertical wall or
bulkhead. In either case, the furnace
assembly can be installed into the bracket
with the heat outlets pointing to the right
or the left side relative to the bracket.