Please click the icon in the APP
main interface, then the aircraft
will take off automatically.
Short press this key on the
controller and the aircraft
will take off automatically
Short press this key on the
remote controller and the
aircraft will AUTO Landing
automatically
Ｃircle
GPS
Manual
Motion
Ｃircle
GPS
Manual
Motion
Switch to “GPS”
position
Short press the Enter key to
enter the GPS hold mode
Throttle stick
return neutral
Quick Start Guide
Ground
Ground
Ground
3.5m
1) Make sure that the GPS signal is received (the blue LED light blinks).
2) Only when “Connected” displays on the upper bar of the main interface of
the APP, you can perform APP operation.
3) Please unlock motors before takeoff. (refer to Page 11 for the detailed method)
12.0 Flight Control
AUTO Takeoff (Remote Controller or APP Operation)
Please click the icon in the APP
main interface, then the aircraft
will land automatically.
AUTO Landing (Remote Controller or APP Operation)
Attention:
1) When you used the function of “AUTO landing”, the landing gear of aircraft will be extended.
1) During landing, you can operate the aircraft forward, backward, rightward and leftward.
2) During the landing process, please switch the flight mode of the remote controller if landing needs to be cancelled.
Attention:
1) Auto Takeoff is usable only under GPS mode or SPORTS mode.
2) Auto takeoff default to 3.5m altitude, and it can be removed by pushing the throttle to midpoint or above,
whenever manual control over the throttle is needed.
GPS mode (Remote Controller Operation)
Attention:
1) The first flight default to GPS Mode after each power on.
2) In the GPS mode, there are Altitude hold, fixed point, brake function, the flight speed is slower (≤5m/s).
3) If the GPS signal is poor or no signal, can only be Altitude hold, but not fixed point.
4) Switch to manual mode can not be fixed point.
12
