Quick Start Guide
When power indicate lights up, exit the stick mode switch.
Choose MODE 1
、
MODE 2
Landing gear
Landing gear
ＭＯＤＥ １
25
10
ＭＯＤＥ ２
Stick Mode Switch
Stick calibration
14.3 Stick Mode Switch, Stick Calibration and Customize Fixed ID
Factory setting of DEVO F8W stick mode & stick calibration has been determined; please refer to the
following operation method for switching and calibration.
Be sure to switch off the aircraft power or lock motor before operation.
Enter stick
Mode
switch
Exit stick
Mode
switch
1. Long press “ ” 3~5 sec
3. Long press “ ” 3~5 sec
2. Short press “ ”
ＭＯＤＥ ２
Rudder
Throttle
Elevator
Aileron
MODE 2 is left-hand throttle
ＭＯＤＥ １
Elevator
Rudder
Throttle
Aileron
MODE 1 is right-hand throttle
※
Customization also supported in APP.
Long press " " button for 3 to 5 seconds, four lights flash alternately to enter stick calibration.
Operate the stick several times within mechanical tuning range and then back in the middle.
Long press the " " button for 3 to 5 seconds again, four indicator lights turn on, then exit stick calibration.
When you exit if vibrate alert, then the calibration fails, please recalibrate.
When power indicate lights off, enter the stick mode switch.
power indicate lights
match the stick mode
IOC
IOC
IOC
DEVO F8W Remote Controller customize Fixed ID
Video
Video
Long-press “ ” button for 3-5 seconds, when the “drop” sound
to set the fixed ID. (for the first time to set fixed ID code, Battery Level indicator flashes
from left to right and then all the light solid.)
Long-press “ ” button 3-5 seconds again, when the “drop drop” sound to clear the fixed ID.
18
