Safety Instructions
17
SAFETY, CONTROL, AND INSTRUCTION DECALS
Safety, Control, and Instruction Decals are installed on the machine;
if any are missing, illegible, or damaged, a replacement should be ordered and installed before
putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.
1. Warning – do not operate the machine without a
deck or other implement attached.
2. Forward Speed Control
● Move lever forward to increase speed; back
to stop.
3. Warning – read Operator’s Manual before servic
ing or performing maintenance.
● Engage parking brake.
● Remove ignition key.
4. Warning – do not engage PTO clutch with PTO
shaft disconnected.
5. PTO Clutch Lever
● Move lever forward to engage PTO clutch;
back to disengage.
Location: RH Fender
Part Number: 8600-45
1. Throttle
● Move lever forward to increase engine
speed; back to idle.
2. Warning – read Operator’s Manual before oper
ating the machine.
3. Warning – wear eye and ear protection when
operating the machine.
4. Warning – roll-over hazard.
● Do not operate on slopes greater than 15
degrees.
5. Warning – thrown object hazard.
● Keep bystanders away from the machine
when operating.
6. Warning – entanglement hazard.
● Keep all guards in place while engine is run
ning.
7. Parking Brake
● Move lever forward to engage Parking
Brake; back to disengage.
Location: LH Fender
Part Number: 8600-43
8600-43
3.
2.
5.
6.
1.
7.
4.
1.
2.
2.
3.
1.
4.
5.
