Assembly and Installation
12
10. Use a jack to block up the tractor a few inches
off the ground
Block Up Tractor
11. Remove the drive tires using a 3/4” socket for
the mounting nuts.
Drive Tires Removed
12. Using a 5/8” wrench and an 11/16” wrench,
remove both deck support arms and reserve all
the mounting hardware with the deck support
arms for later reinstallation of the deck.
Remove Deck Support Arms
13.
Tractors prior to S/N 2022-176529
may need
to add support strap mounting holes. Locate
and drill the support strap mounting holes using
the MR Chassis Drill Guide provided if needed.
Align the edge of the guide with the edge of the
chassis before clamping it into place.
CLAMP TEMPLATE PLATE
DRILL 1/8” Ø PILOT HOLES
THEN DRILL 5/16” Ø HOLES
REPEAT ON OPPOSITE SIDE
Drill Support Strap Mounting Holes
14. Slide the dozer blade carefully into position.
Position Dozer Blade
