Assembly and Installation
10
At least 1/2”
Eye Bolt Threads
7. Put the lift handle in place, as demonstrated in
the photo and insert two (2) 5/16-18 x 2 hex
bolts (P/N F275) through the lift handle. Install
the accompanying whiz lock nuts (P/N F009)
and tighten them with a 1/2” wrench.
Install Lift Handle
8. Align the clevis over the locking arm and insert
the clevis pin. With the clevis pin in place,
check that the lift release push button stands
3/8” above the lift handle. Adjust the clevis or
button position on the threaded rod until the
push button is positioned as shown.
Clevis Pin
Align Clevis
3/8”
Check Lift Release Push Button
9. Insert the cotter pin into the clevis pin opening,
using needle nose pliers to bend the cotter pin
to secure the clevis pin.
Cotter Pin
Secure Clevis
10. Mount the 5A Fuse Harness (P/N 1940-1)
using the 10-24 x 5/8 PPHMS (P/N F027) and
10-24 keps nut (P/N F002) provide.
Mount 5A Fuse Harness