19
10/08
10.3
Change lamp
WARNING
Please just lamps, which are conform with the required specifications.
See
Technical Specifications
.
1.
Screw lamp out and in.
See
Screw in and out of lamp
.
10.4
Change micro-fuse
WARNING
Danger of electric shock and fire through short-circuit
A micro-fuse, which is not conform with the required specifications,
doesn´t protect against the overloading of the device.
Please just use a micro-fuse, which is conform with the required
specifications. See
Technical Specifications
.
ADVICE:
The fuse holder keeps a spare fuse.
1.
Switch off device.
See
Switch the device on and off
.
2.
Disconnect from power supply:
Unplug power cord.
3.
Open fuse holder:
Use a small screwdriver to lift up the fuse holder carefully and slightly.
4.
Pull out the fuse holder with your hands completely out of the slot.
5.
Take out old micro-fuse.
6.
Take the new micro-fuse out of the spare slot and slide it in the center
of the holder.
7.
Slide the fuse holder carefully into the slot as far as it goes.
