14
6.4
Connect to power supply
1.
Switch off device.
See
Switch the device on and off
.
2.
Compare the local power supply with the connected load of the device.
See
Technical Specifications
.
If the values differ, please contact
or tel. 49 84 32
/ 9489-0.
3.
Connect the power cord with the socket on the device and with the
power socket.
7.
Operation of the device
7.1
Adjust tilt angle
1.
Open tilt lever.
2.
Adjust the required tilt angle.
3.
Tighten tilt lever.
7.2
Switch the device on and off
1.
Switch on device:
Set On/Off tappet switch on I.
The device is ready for operation.
If the lamp is switched on:
The lamp lights up.
2.
Switch off device:
Set On/Off tappet switch on O.
If lamp was switched on:
The lighting of the switch goes out.
7.3
Switch lamp on and off
The lamp can be switched on and off through the On/Off tappet switch on
the operation panel.
