12
6.2
Mount and demount reflector
WARNING
Posterior danger of bursting of flash tube
Don´t touch the lamp with bare hands. Just touch the lamp at the plastic
socket or wear clean cotton gloves or use a clean cloth.
1.
Mount the device on a tripod (optional).
See
Mount the device on a tripod (optional)
.
2.
Mount the reflector:
Switch off device.
See
Switch the device on and off
.
Cool down the device.
CAUTION!
Danger of burning on the lamp. Please let the device
cool down for approx. 20 minutes.
If lamp should be screwed in:
Screw out the lamp.
Push back unlocking lever and keep pressed.
Put in the reflector in the three openings on the device, so that the
opening for the Reflex Umbrella (optional) faces downwards.
Turn the reflector clockwise and listen for it to snap into place.
Trigger the unlocking lever.
Stick the safety cap onto the unlocking lever.
3.
Demount reflector:
CAUTION!
Danger of burning on lamp. Let the device cool down for
approx. 15 minutes.
Screw out the lamp.
Remove the safety cap from the unlocking lever.
Push back unlocking lever and keep pressed.
Turn reflector anticlockwise as far as it will go and take off from the device.
