Walimex Pro Director III, Instruction Manual

Page: 13 / 22

24 25
WARNING
Danger of electric shock, burn hazard
Please note, that the device is still connected with the supply voltage even if it is
switched off. Just after disconnecting the device from the power supply through
pulling out the power cable, the device is actually de-energized.
■
Switch off your device when it is not in use.
■ Switch off your device before mounting and maintenance and disconnect
from power supply.
■ Protect your device against unintended switching-on.
■
Unplug the power cord, if the flash is not in use for a long time.
WARNING
Only connect the power supply unit or the charger to an earthed socket.
WARNING
Danger of burning on hot parts
■ The illuminant may reach temperatures of up to 40 °C.
■ Don´t touch the parts during operation and cooling down.
■
Please cool down your device before starting any mounting or maintenance
arrangements.
1.2 Identifications in these instructions for use
Identification Meaning
Draws your attention to the dealing with and the effect of
safety information.
WARNING
Draws you attention to a dangerous situation, which can
result in severe or even fatal injury, if not avoided.
CAUTION
Indicates a hazardous situation, which, if not avoided, may
result in minor or moderate injury.
NOTE
Draws your attention to possible material damage and
other important information in connection with your equip-
ment.
2. Important safety information
WARNING
Danger of crashing, entrapment, burning and fire through the falling down
of the device
■ This device weighs up to 340 g (without battery).
■ Make sure, that the device is always positioned tilt and skid resistant and
stored securely.
■ Make sure that all fastening screws have been properly tightened.
■ Keep out of reach of children and animal. They could overturn the device.
■ Avoid placing cables where they can be tripped over. The device could be
overturned.