27
28
11. Troubleshooting
Problem
Solution
The microphone does not
turn on
The battery may be incorrectly
oriented in the battery com-
partment. Open the battery
compartment and make sure
the battery is correctly
installed.
The battery may be exhaus
-
ted. Replace it with a new
one. See the „Specifi cations“
section for compatible re-
placements.
The battery terminals are dir
-
ty. Open the battery compart-
ment and clean the terminals
with a cotton swab.
The battery discharges too
quickly
The microphone is being left
on. Turn o¬ff the microphone
by switching to „OFF“ to save
battery when the recording
is finished.
You are using the microphone
in extremely hot or cold condi-
tions which drains it quickly.
Too much ambient noise is
being picked up
When there is too much
background noise, switch to
-10dB to reduce unwanted
background noise.
12. Specifications
Transducer
Electret condenser
Polar pattern
Omnidirectional
Frequency range
65 Hz ~ 18 KHz
Signal/Noise
78 dB SPL
Sensitivity
-30 dB +/- 3 dB / 0 dB=1V/Pa, 1 kHz
Output impedance
1000 Ohm or less
Battery type
LR44 included
(compatible with LR44, 357, and SR44)
Connector
3.5mm (1/8”) 4-pole gold plug
Pad Switch
0/-10dB
Cable length
6,0m
Weight
58g
