Setup and Connection – Connections
Waldorf Q User’s Manual
18
In
Thru
Out
MIDI
MAIN OUT
SUB OUT 1
SUB OUT 2
PEDAL
IN
Left/Stereo
Right/Mono
D.OUT
Left/Stereo
Right/Mono
Left/Stereo
Right/Mono
PEDAL / CV IN
Tip:1 / Ring:2
Stereo
1
2
Coaxial
Digital Output
S/PDIF Format
Switch Pedals
Switch 1: Tip /
Ground
Switch 2: Ring /
Ground
Out
In
Control Pedals
Tip / Ground:
47k
Ω
Potentiometer
Ring: +5V
Main Output
to mixing desk,
headphone or
amplifier
Left/Stereo:
Tip: Left Signal
Ring: Right Signal
Sub Output 2
to mixing desk or
amplifier
Left/Stereo:
Tip: Left Signal
Ring: Right Signal
External In
from mixing desk or
audio source
Tip: Left Signal
Ring: Right Signal
Sub Output 1
to mixing desk or
amplifier
Left/Stereo:
Tip: Left Signal
Ring: Right Signal
MIDI Thru
to MIDI In of further
tone generators
MIDI In
from MIDI Out of a
Computer or other
MIDI Controller
MIDI Out
to MIDI In of a
Computer or tone
generator
Connections
☞
To connect the devices:
1.
Turn all units off.
2.
Connect the Q’s main audio outputs
Main Out
to your mixing console. Optionally
connect the auxilliary audio outputs
Sub Out 1
and
Sub Out 2
too.
3.
Connect the power supply cable that came with the Q with the
Power Supply
jack.
4.
Plug the other side of the power supply cable into a suitable AC power outlet.
5.
The Q should power up itself. If not, switch on the Q with the
Power
button
.
