Global Parameters – Global Menu
Waldorf Q User’s Manual
144
Mix Level
0...127
Determines the volume of the audio signal selected in the
Mix In to
menu.
Disp.Time!Contrast
1.5s ! 064
Display Timeout (Disp.Time)
0.1s…15.5s
Determines how long parameters are displayed in the upper right corner of the display when
changing a parameter.
���
When you are new to the Q, you might want to set it to a value of around 10.0s. When you got
some experience with the Q, you will probably set it to a lower value of around 1.5s.
Display Contrast (Contrast)
0…127
Sets the display contrast.
Operating System (OS)
BOOT ! OS
1.05 ! 3.00
This menu page shows the latest Operating and Boot system of your Q. For more information about
updating your Q please read "Updating the System software" on page 154.
Additional Global menu parameter of the Q Keyboard versions
Pedal/CV1 Offset
-64…+63
Pedal/CV1 Offset
+00
Sets the initial gain for Control Pedal/CV 1 that is used when the pedal is at its
minimum
position. To
find out which value is suited for the Control Pedal/CV you want to use, do the following:
☞
To adjust Pedal/CV1 Offset:
1.
Set
Pedal/CV1 Ctrl.
to
Control W
.
2.
Set an empty Standard Modulation Matrix slot of the current sound as follows:
Source
:
Control W
,
Destination:
Pitch
,
Amount:
+
63.
3.
Move the Pedal to its minimum position or make sure that the CV is at its minimum
voltage.
4.
Adjust
Pedal/CV 1 Offset
until the pitch is the same no matter if the
Amount
in the
Matrix slot is set to
+00
or
+63
.
