PPG Wave 2.V
Waldorf
24
Operation Manual
se, for example. Using the ENV 3 ATT dial on the analog user interface, you control,
whether the deflection should be positive or negative.
ENV3>SUB
ON, OFF
You can use this parameter to select the AD-Envelope 3 as a modulation source for the
pitch of the sub oscillator. Using the ENV 3 ATT dial on the analog user interface, you
control, whether the deflection should be positive or negative.
BEND>PITCH
OFF, BOTH, SUB
This parameter lets you control the pitch changes that you make with the Pitch Bend
wheel.
You can make these settings:
OFF: The Pitch Bend wheel position doesn’t influence the pitch of the sound.
BOTH: The Pitch Bend wheel can be used to simultaneously change the pitch of
both oscillators.
SUB: The Pitch Bend wheel is used to only change the pitch of the sub oscillator.
The main oscillator’s pitch remains unchanged.
���
This parameter can also be found on the MODULATION menu.
TOTAL TUNE
400...499
This parameter changes the overall tuning of the PPG Wave 2.V. The value refers to the
reference pitch for MIDI note A3. The standard setting for this is 440 Hz, which is used
by most acoustic and electric instruments. We recommend that you only change the
overall tuning, if you are sure of what you’re doing. Please keep in mind to adjust the
tuning of all other use instruments, if you change Total Tune.
���
We have no idea, why this parameter was adjustable between 400Hz and 499Hz
in the original PPG. But to keep the charm of the original, we have implemented
it in the same way.
SEMITONE 1-8
je 0...63
These parameters are directly connected to KEYBOARD MODE in the DIGITAL menu
(also see the section “Keyboard Mode” on page 20). They are used to define the pitch
of the individual voices in the different play modes in semitone steps. If set a Semitone
value to “0”, then the corresponding semitone will wind up in the 32’ octave range. If
you set it to “12”, it winds up in the 16’ octave range etc.
SEMITONE 1 controls the pitch in POLY mode.
SEMITONE 1 and 2 control the pitches in DUAL mode.
SEMITONE 1 to 4 control the pitches in QUAD mode.
SEMITONE 1 to 8 control the pitches in MONO mode.
Summary of Contents for PPG Wave 2.V
Page 1: ......
