PPG Wave 2.V
Waldorf
12
Operation Manual
Graphic Display: Click on one of the handles to continuously and
smoothly change the envelope parameters or click into any envelope phase to let its
value jump there.
Filter Response: Click into the graphic display to simultaneously change
Cutoff and Emphasis.
Wheel: To change the value, click on the wheel and drag the mouse up or
down. The Pitch-Bend wheel snaps back into its center position as soon as
you let go of the mouse button.
If you click on the PPG or the Waldorf logo, a “program
information” window opens.
Key Combinations
If you hold down the [Alt] key on your computer keyboard and click on any control,
its value is automatically set to its default value (e.g. Cutoff is set to 63, Emphasis is
set to 0 or modulations are set to OFF).
You can increase the resolution of a dial, value selector or wheel by holding down
the [Shift] key on your computer keyboard when you use the respective control. If a
dial is set to “circle mode” (you change a value by dragging around the dial in a
circle), then you can temporarily change to “up/down mode” by holding down
[Shift]. Find more about dial modes on page 10.
If you hold down the [Ctrl] (on the PC) or [Command] key (on a Macintosh compu-
ter) when you click on a control, its value is displayed in the Sound-Display without
being changed.
Hiding the Keyboard
Same as the original, the PPG Wave 2.V provides a standard keyboard (61 keys). If your
monitor gets crammed with windows, you can hide the keyboard by pressing the KEYB
button. Pressing the button again lets the keyboard pop up again.
Summary of Contents for PPG Wave 2.V
Page 1: ......