PPG Wave 2.V
Operation Manual
11
Waldorf
The Controls
Simply use the mouse to set the PPG Wave 2.V controls.
Dials: To set this control, click on it, hold down the mouse button and drag the
mouse around the dial in a circle. Dragging in a greater circle increases the value re-
solution that is available. The PPG Wave 2.V display simultaneously shows the actu-
al value of the corresponding parameters. If you prefer vertical mouse movement to
change a value, then you can set the PPG Wave 2.V into this mode. Just hold down
the [Shift] key on your computer keyboard and click on the PPG-logo. To set this
back to normal mode, Shift/click again.
Display: The Display shows the current Sound number
and the Sound name. If your turn a dial. its numerical value is shown in the display.
A mouse click on the sound number opens a pop-up menu with the available
Sounds. Find more information in the section “Selecting and Playing Programs” on
page 8 of this manual.
Switches: By clicking a switch once, you switch the corresponding functi-
on On or Off.
Buttons: A mouse click on a button activates a function. The DIGI button can
for instance be used to open the DIGITAL menu. Except for the KEYB. button, but-
tons light up in red when they have been used. Button states are not saved with Pro-
grams.
Value Selectors: Position the mouse pointer on the value, hold down
the mouse button and drag up or down.
Summary of Contents for PPG Wave 2.V
Page 1: ......
