The following paragraph describes the function and the result of each modifier function in
detail:
+
Returns the sum of
Source #1
and
Source #2
.
-
Returns the difference of
Source #1
and
Source #2
.
*
Returns the product of
Source #1
and
Source #2
.
/
Returns the quotient of
Source #1
and
Source #2
.
XOR
Returns the binary exclusive-or operation of
Source #1
and
Source #2
.
OR
Returns the binary or operation of
Source #1
and
Source #2
.
AND
Returns the binary and operation of
Source #1
and
Source #2
.
S & H
Samples and holds the value of
Source #1
in regular intervals, determined
by the value of
Parameter
. You can use this function to create rhythmcally
modulations based on a definable source.
Ramp
Creates a linear ramp from minimum to maximum. The ramp is triggered
each time
Source #1
has a positive transition. The rise time is specified by
Parameter
. You can use this e.g. to get an additional sawtooth source from
an LFO while another waveform is selected.
Switch
Returns maximum, if the value of
Source #1
is above the value of
Parameter
. Otherwise minimum is returned. Use this function to trigger an
action depending on a source signal’s value. E.g. applying ring modulation
when notes are played with maximum velocity. You can use this also to
create a pulse signal out of an LFO, where
Parameter
determines the pulse
width.
Source #1
Switch function
Parameter
Time
Level
max.
Source #1
Ramp function
Parameter
Time
Level
max.
Source #1
S & H function
Parameter
Time
Level
User’s Manual MicroWave II • MicroWave XT • XTk
83
