When Multi mode is selected, you can play and edit the multi programs and the single
sounds each program is based upon.
☞
This is how you switch back to Sound mode:
1. Turn the third value dial
햾
, labeled
Mode
, counterclockwise:
2. The display shows the program number and the name of the selected Sound
program again (name may be different depending on the soundset loaded):
You can also switch between Sound and Multi mode when you are not in Play mode e.g.
when editing in a parameter page. To do so, you have to turn the third value dial
햾
, also
labeled
Sound / Multi
, while holding down the
Shift
key
햽
.
The XTk features another method to switch between Sound and Multi mode. Similar to
switching banks, you can activate the Multi mode by pressing the numeric key labeled
Multi
while holding the
Select
button
헂
. Switching back to Single mode is done in the
same way by pressing the numeric button
A
or
B
while holding
Select
. Remember that
you still have to enter a 2 or 3 digit program number before the switch is performed.
Editing Parameters
In order to change or edit a sound or multi in the MicroWave II/XT/XTk, you must access
the appropriate parameters. These parameters are arranged in various pages. The front panel
shows the headlines for each parameter page:
Diagram 2: Parameter pages
Store
Instrument
Recall
Filter 1
Compare
Filter Env.
Utility
MIDI
Undo
Volume
Multi
Global
Osc.1
Osc.2
Wave 1
Wave 2
Quality
Mix
Play Access
Filter 2
Amplifier
Pan
Glide
Trigger
Arpeggiator
Volume Env.
Wave Env.
Free Env.
LFO 1
LFO 2
Modifiers
Mod Matrix
Name
Tempo
Controls
Name
Sound
Tune
Range
Arpeggiator
Controls
Volume
Tables
Tune
System
Sound
Sound / Multi
Play Sound A001
|
Mode
|Main Vol.
Saw Repeat WMF
|
Sound
|
100
Play Multi
001
|
Mode
|Main Vol.
Hit Me Bigga |
Multi
|
100
User’s Manual MicroWave II • MicroWave XT • XTk
25