Waldorf FN8120GE, Installation And Operation Manual

Page: 16 / 37

14
Operation
Filling the Tank(s)
NOTE: WALDORF 'FAST-FRI' fryers can be used with both oil and shortening.
1. Before filling the tank, always check that the drain valve(s) behind the door is (are) closed. A locking
slide is provided on these valves and this should always be in the locked position during use.
OIL - Carefully fill fryer tank with oil until the 'FILL-LEVEL' mark is reached.
The FN8120GE fryer will hold 20 litres of oil.
The FN8226GE fryer will hold 13 litres of oil per tank.
The FN8130GE fryer will hold 31 litres of oil.
SHORTENING - Shortening should be cut in pieces and packed down into tank.
The FN8120GE fryer will hold 37lbs shortening.
The FN8226GE fryer will hold 24lbs shortening per tank.
The FN8130GE fryer will hold 46.5lbs shortening.
 Turn ‘On’ the fryer. Melt cycle should be set to CY S on the control
panel display. Refer to ‘Controller Advanced Programming Mode’ section
to change. Heating will automatically cycle at a lower temperature to
gently melt the shortening.
T
HE OPERATOR MUST TAKE GREAT CARE TO USE THE
F
RYER SAFELY
,
TO GUARD AGAINST RISK OF INJURY AND
FIRE
.

DO NOT
LEAVE FRYER UN
-
ATTENDED DURING OPERATION
.

DO NOT
REPLENISH THE OIL
(
FRYING MEDIUM
)
IN THE FRYER WHEN THE FRYER IS
HOT.

DO NOT
OVER FILL THE OIL
(
FRYING MEDIUM
)
IN THE FRYER ABOVE THE TOP LEVEL MARK
.

DO NOT
ALLOW THE OIL
(
FRYING MEDIUM
)
IN THE FRYER TO FALL BELOW THE LOWER LEVEL MARK
.

DO NOT
ALLOW THE OIL
(
FRYING MEDIUM
)
IN THE FRYER TO OVERHEAT
.

DO NOT
INTRODUCE WET FOOD OR WATER INTO THE
HOT
OIL
(
FRYING MEDIUM
).

DO NOT
USE FLAMMIBLE SOLVENTS AND CLEANING AIDS ON OR IN CLOSE PROXIMITY TO THE FRYER WHILST THE
FRYER IS STILL
HOT.
Warning
Warning
D
ANGER OF FIRE EXISTS IF THE OIL LEVEL IS BELOW THE MINIMUM
'LO'
INDICATED LEVEL
Warning
CORRECT LEVEL FOR FRYING MEDIUM
WHEN AT FRYING TEMPERATURE.
INDICATES CORRECT FRYING MEDIUM
LEVEL WHEN COLD.
Fig 5