7
8
3
3. Release locking
screw in order to
turn hopper
1
1. Plug power plug
into socket
2
2. Press power switch
to ON
4
4. Turn hopper in the
direction of >MIKRO<
until you hear a slight
grinding sound.
MILL
LAD
Y
MILL
LAD
Y
MIKRO
0
MIKRO
MIKRO
20
10
grob
0
MIKRO
20
30
40
50
10
fein
grob
INITIAL OPERATION
1. Place mill on a ground surface.
Attention:
Never place the
mill on a hot surface (eg stovetop)
2. Check if supply voltage corresponds to the required voltage
for the device
3. Plug power plug into socket.
4. Press power switch to ON.
SETTING OF GRINDER
Coarseness can be regulated continuously. Just turn hopper
and adjust the distance of the 2 millstones according to the
desired coarseness. A locking screw on the side assures the
setting and prevents from loosening.
INITIAL OPERATION,
SETTING OF GRINDER
!
NOTE:
Efficiency & result of the grinding depend on the
quality of the mill material. The drier the mill material,
the higher the efficiency.
