20
Mounting
ENG
3. Mounting
CAUTION
Risk of injury caused by a falling or
tilting light.
Personal injury and material damage.
X
Mount fastening elements correctly.
3.1 Mounting the fastening
elements
NOTICE
Material damage caused by missing
ESD protection.
Electrostatic discharge and damage to
electronic components.
X
In electrostatically protected areas
(EPA), only luminaires suitable for
EPA must be used.
X
Use only fastening elements suit-
able for EPA.
Fig. 1: Fastening element.
X
Screw the fastening element to the
mounting surface using four suitable
screws.
3.2 Mounting the light to the
fastening element
A
B
Fig. 2: Mounting the light to the fastening
element.
X
Insert the stud
A
on the light support
into the opening of the fastening ele-
ment, see Fig. 2.
X
Tighten the screw
B
to fix the support.
3.3 Mounting the magnifier cover
CAUTION
Fire risk when the magnifier is not
covered and exposed to sunlight.
Personal injury and material damage.
X
When the magnifier is not used,
cover it with the magnifier cover.
Fig. 3: Mounting the magnifier cover.
X
Compress the upper part of the magni-
fier cover, see Fig. 3.
X
Place the magnifier cover on the mag-
nifier from above and release the cover.
The magnifier cover is clamped to the
light head.
