![background image](http://html1.mh-extra.com/html/daintree/ge-current-lumination-tetra-powergrid-series/ge-current-lumination-tetra-powergrid-series_installation-manual_3229612001.webp)
Installation Guide
ARCH015
Lumination
®
LED Luminaire
93013528, 93013522, 93013523, 93013524
(Tetra
®
PowerGrid Series - Gen 3)
BEFORE YOU BEGIN
Read these instructions completely and carefully.
WARNING / AVERTISSEMENT
RISK OF ELECTRIC SHOCK
• Disconnect power before servicing or installing product.
RISQUES DE DÉCHARGES ÉLECTRIQUES
• Couper l’alimentation avant le dépannage ou avant l’installation
du produit.
Save These Instructions
This product is intended solely for the use of nonresidential architecture lighting and is not intended for
use in any other applications.
LED System Features
• Certified to UL 2108
• Low-Voltage Luminaire (24 VDC)
• IP54, dry or damp location rated.
• Compatible with 24 Volt GE LED Drivers
• Dimmable with Current 0-10V Dimming LED Driver or
Current Dimming Module and compatible dimming
controller
Electrical Requirements
• Do not use in wet locations.
• The grounding and bonding of the LED Driver shall
be done in accordance with National Electric Code
(NEC) Article 600.
• Follow all National Electric Codes (NEC) and
local codes.
Prepare Electrical Wiring
Save These Instructions
This product is intended solely for the use of
nonresidential architecture lighting and is not intended
for use in any other applications.
For use in the following applications
• Backlighting
• Illuminated Walls or Ceilings